Online Ordering
Investment
Financing Options
Request Info
References
Contact Us
Employment Opportunities
Company News
We proudly carry




For a complete list
of our fine vendors
Click Here
|
 |
Vacuum Specifications:
- 7 Amp Motors - Two LambÒ electric, ultra-quiet ACUSTEKÒ
series, 1 HP (max) each, bypass cooled.
- Filters - Four bag system uses high performance,
napped, synthetic filtration media with 15 sq. ft. effective
filtration area. Two easy access service doors.
- Air Flow - 150 cu. ft./min. 84" water lift (maximum
suction).
2" Diameter Hose - High flex vinyl, crushable, 15 ft.
long. Includes cuff and polyethylene hand tool
Spot Remover/Shampoo
Specifications:
- Maintenance-free Compressor - 3.4 amp, heavy-duty
rated. Keeps your maintenance costs low.
- Safe, Secure Delivery - Shampoo delivery hose is steel
braided to protect against cutting. Application brush has switch
controlled delivery.
|
- Coin Mechanism - Electronic type, metal construction
accepts up to 1 inch diameter coins per sample
- "Intelligent" Display and Dual Timer - Our "exclusive"
dual timer individually controls each service during one cycle for
vend price and time from 2 seconds to 8.5 minutes per coin. The
large LED display shows vend price for each service and is
synchronized with the vend selector switch. Accumulates 1 to 15
coins and displays the balance required to start cycle. LED
display defaults to a custom message when Carpet WizardÒ is not in
use. Toggle switches actuate real time recalculation of cycle time
remaining. Timer sounds an audible signal at completion of cycle
and scrolls an invitation to purchase more time on a "per coin"
basis. If no further service is used, the display scrolls a custom
"Thank You" message before resetting to the default "Welcome"
message. A built-in tamper-activated alarm can be connected to
premises alarm system. Eight port data acquisition and storage
with I/O port for download. Solid-state type controller with high
capacity output switch. Overload protection isolates loads and
transients from control circuits.
|

|